Driveways, patios, foundations, and commercial flatwork for Aurora, engineered for local soil and built for Colorado winters.
Aurora's scale means everything from new residential flatwork in Southshore and Saddle Rock to commercial parking lots and site work. We bring crews sized for both.
Aurora spans a lot of ground and soil types. We check the conditions on each site and engineer driveways, foundations, and commercial slabs to match. That is not a detail we skip. Whether you are replacing a cracked driveway, adding a patio, or pouring a foundation for a new build, we plan the base, drainage, reinforcement, and jointing for the ground your property actually sits on.
You get a written estimate before work begins, a structural engineer on staff for the jobs that need one, and a crew that pulls permits when the project requires them. We are licensed, bonded, and insured for residential and commercial work across Arapahoe County and the wider Front Range.
Aurora runs east across Arapahoe County, and it sits about 200 feet higher than downtown Denver at roughly 5,471 feet. That extra elevation and the open eastern exposure mean more wind and a harder, drier bite on fresh concrete. As the city spreads toward Saddle Rock, Southshore, and Tallyn's Reach, we pour on newer subdivisions where the ground was graded and filled during construction. Fill is only as good as the compaction it got, so we test what we're pouring on instead of assuming. A slab over loose or reactive fill will move no matter how good the concrete is.
The clay east of Denver is expansive. It swells and shrinks with every wet and dry cycle, and that movement is what tears slabs apart. We answer it below the slab, with over-excavation and compacted structural fill where the native ground is reactive, and above it with reinforcement and control joints that let the slab move without cracking where you'd see it.
Our flatwork mix runs 4,000 to 4,500 psi with 5 to 7 percent entrained air for the freeze and thaw, and we keep the water down so the surface finishes dense. Out on the wide-open sites east of town, wind is the real enemy of a good cure. We set windbreaks and get curing compound down fast so the top doesn't flash off before it hardens.
Aurora shares Denver's long flatwork season, roughly April into October, but the wind out here shortens the good hours on any given day. We watch the afternoon gusts and will start early to beat them, because a dry, windy afternoon pulls moisture out of a slab faster than almost anything else.
Summer is fine as long as we protect the cure. Late spring and early fall are easier. Winter work happens with blankets and heated mixes when a build can't wait for spring.
From new construction to established streets, we pour throughout Aurora and its surrounding communities, including:
Do not see your neighborhood? We almost certainly cover it. Give us a call and we will confirm and set up a free site visit.
Describe the problem and we will tell you what the fix is, before anyone drives out to Aurora.
| What you are dealing with | The service that fits |
|---|---|
| Cracked or heaved driveway | Driveway replacement when the base has failed, repair when it has not |
| One slab sitting lower than the rest | Mudjacking or foam leveling lifts it without a tear-out |
| Want more usable yard | Patios, walkways, or a stamped upgrade |
| Doors sticking, stair-step cracks inside | Foundation repair, assessed by our in-house engineer |
| Surface worn but the slab is sound | Resurfacing or an overlay restores the top |
Across Aurora, a handful of projects come up again and again. New and replacement driveways top the list, because an aging or heaved drive is both an eyesore and a winter hazard. Patios and outdoor living spaces are close behind, as homeowners push to use the yard more of the year. Foundations for new builds and additions get the most engineering attention, since the soil here punishes anything poured without a plan. And concrete repair, from crack sealing to mudjacking, saves Aurora homeowners the cost of a full tear-out when a slab is still sound underneath.
Whatever you are building, the full list of services is available right here in Aurora. Tap any one for local detail and a free estimate.
You always know what is happening and what it costs before we mix a single yard. Here is the path from first call to final walkthrough.
We visit the site, measure, check drainage and soil, and hand you a clear written quote. No charge, no pressure.
We set the grade, thickness, reinforcement, and finish. Structural work gets engineered and permitted.
Forms, rebar, and a clean pour. We screed, float, and finish to the texture you picked, then cut control joints.
You can walk it in 24 to 48 hours. We walk the job with you and explain how to care for it through the first winter.
Still unsure about something?
Call the crew at (303) 569-4046 and we will talk it through.
Get a free, no-obligation estimate from a crew that knows Colorado soil, Colorado weather, and how to finish concrete that lasts.
Accessibility
Adjust the site to fit how you read and browse. Your choices are saved on this device.