Slabs and piers sized for steel-frame loads.
A steel building puts its whole load on a handful of columns, and every one of those columns lands on concrete we pour. Get the piers, footings, and anchor bolts right and the frame goes up clean. Get them wrong and the erection stalls.
Decades-old slabs in Centennial commonly show soil-driven cracking. We address drainage and base so the replacement does not repeat the failure. For steel building foundations, that local knowledge is exactly what protects your investment. We plan the base, drainage, reinforcement, and finish around the conditions on your Centennial property, not a generic detail.
We serve every part of Centennial and the surrounding area, including Walnut Hills, Willow Creek, Foxridge, Homestead, and more. Wherever you are in Arapahoe County, the crew shows up with the same standard.
At roughly 5,833 feet, Centennial gets intense high-altitude sun and a freeze and thaw cycle that is hard on any concrete poured without care. For steel building foundations, that means air-entrained mixes, deliberate curing, control joints cut on time, and a base prepared for the expansive clay under your property. It is the difference between work that holds for decades and work that starts failing by the first or second spring.
We template the anchor-bolt patterns off the steel drawings and set them tight, because a bolt off by an inch is a problem the erector cannot fix in the field. Piers and footings are sized for the reactions your engineer specs.
Shop, warehouse, or storage, we pour the slab thick enough for the traffic and load, reinforce it, and cut the joints on time so it stays flat and crack-controlled.
Every Centennial job starts with a free, written estimate and a structural engineer on staff for the work that needs one. Licensed, bonded, and insured, with finishes from a clean broom texture to stamped, colored, and sealed.
You always know what is happening and what it costs before we mix a single yard. Here is the path from first call to final walkthrough.
We visit the site, measure, check drainage and soil, and hand you a clear written quote. No charge, no pressure.
We set the grade, thickness, reinforcement, and finish. Structural work gets engineered and permitted.
Forms, rebar, and a clean pour. We screed, float, and finish to the texture you picked, then cut control joints.
You can walk it in 24 to 48 hours. We walk the job with you and explain how to care for it through the first winter.
Still unsure about something?
Call the crew at (303) 569-4046 and we will talk it through.
Get a free, no-obligation estimate from a crew that knows Colorado soil, Colorado weather, and how to finish concrete that lasts.
Accessibility
Adjust the site to fit how you read and browse. Your choices are saved on this device.