Heavy, flat floors for shops and big garages.
A shop floor takes a beating a house slab never will: vehicles, lifts, jacks, and dropped steel. We pour thick, reinforced, dead-flat slabs that shrug all of it off and stay easy to sweep and seal.
The wooded, hilly terrain here brings grading and drainage challenges. We plan slope and water management so driveways and patios drain away from the home and the structure stays sound. For shop & detached garage slabs, that local knowledge is exactly what protects your investment. We plan the base, drainage, reinforcement, and finish around the conditions on your Castle Pines property, not a generic detail.
We serve every part of Castle Pines and the surrounding area, including The Village at Castle Pines, Castle Pines North, Lagae Ranch, Daniels Gate, and more. Wherever you are in Douglas County, the crew shows up with the same standard.
At roughly 6,450 feet, Castle Pines gets intense high-altitude sun and a freeze and thaw cycle that is hard on any concrete poured without care. For shop & garage slabs, that means air-entrained mixes, deliberate curing, control joints cut on time, and a base prepared for the expansive clay under your property. It is the difference between work that holds for decades and work that starts failing by the first or second spring.
We size the thickness and reinforcement to what you will run on it, from pickups to a two-post lift to a loaded trailer. Thickened edges and control joints keep the slab flat and crack-controlled under real use.
We can leave a hard steel-troweled surface ready for epoxy or polish, set floor and trench drains, and pour the door apron so the transition to the drive is smooth.
Every Castle Pines job starts with a free, written estimate and a structural engineer on staff for the work that needs one. Licensed, bonded, and insured, with finishes from a clean broom texture to stamped, colored, and sealed.
You always know what is happening and what it costs before we mix a single yard. Here is the path from first call to final walkthrough.
We visit the site, measure, check drainage and soil, and hand you a clear written quote. No charge, no pressure.
We set the grade, thickness, reinforcement, and finish. Structural work gets engineered and permitted.
Forms, rebar, and a clean pour. We screed, float, and finish to the texture you picked, then cut control joints.
You can walk it in 24 to 48 hours. We walk the job with you and explain how to care for it through the first winter.
Still unsure about something?
Call the crew at (303) 569-4046 and we will talk it through.
Get a free, no-obligation estimate from a crew that knows Colorado soil, Colorado weather, and how to finish concrete that lasts.
Accessibility
Adjust the site to fit how you read and browse. Your choices are saved on this device.