Custom, one-piece concrete surfaces for kitchens and outdoor bars.
A concrete countertop is built for your kitchen and nobody else's. We measure your cabinets, form the shape you want, cast the surface, and finish it by hand. That means a counter sized to the exact run of your island, an integral sink with no seam to catch crumbs, a drainboard sloped right into the basin, and edges and color chosen to match the rest of the room. You will not find that in a slab pulled off a rack. It is the difference between fitting a surface to your space and forcing your space to fit a surface.
For Front Range homes, the practical wins matter as much as the look. Concrete handles a hot pan set down in a hurry better than most surfaces, and a properly sealed top wipes clean and resists the everyday wear a working kitchen hands out. We pour for indoor kitchens and islands, and for outdoor kitchens and bar tops that have to live through a Colorado winter. The dry air and the swing between a freezing morning and a sunny afternoon are hard on outdoor surfaces, and we build and seal with that in mind.
Steep, rocky ground makes grading and drainage the heart of the job. We plan both before we form. For concrete countertops, that local knowledge is exactly what protects your investment. We plan the base, drainage, reinforcement, and finish around the conditions on your Morrison property, not a generic detail.
We serve every part of Morrison and the surrounding area, including Willow Springs, Friendly Hills, Red Rocks area. Wherever you are in Jefferson County, the crew shows up with the same standard.
At roughly 5,764 feet, Morrison gets intense high-altitude sun and a freeze and thaw cycle that is hard on any concrete poured without care. For countertops, that means air-entrained mixes, deliberate curing, control joints cut on time, and a base prepared for the expansive clay under your property. It is the difference between work that holds for decades and work that starts failing by the first or second spring.
We start with a template taken from your actual cabinets, not a drawing, so the fit is true. From there we build forms to your dimensions and cast the piece with a reinforced mix, because a countertop spans unsupported runs over sinks and corners and needs steel and the right blend to hold without cracking. Most of our tops are cast and cured before they ever reach your kitchen, which keeps the mess and the wait out of your house. Once it has cured, we set it, fit the seams tight, and finish the surface to the texture you picked. Integral sinks, drainboards, and embedded details like a trivet or a piece of glass get planned into the form from the start, not added after.
This is where a concrete top stops looking like concrete and starts looking like yours. Color goes in two ways: mixed through the whole pour for a tone that runs all the way down, or worked into the surface for more depth and variation. We match it to your cabinets, your floor, or the stone you already have, instead of asking the room to live with gray. Edges are formed to your taste, from a clean square to a soft eased profile to a heavier waterfall over the end of an island. Want something set into the top? We can cast in a drainboard, a trivet groove near the range, or small embedded pieces. Each top is one of a kind because it is built around your choices, not pulled from a catalog of stock options.
This is the real question buyers ask, and it deserves a straight reply. Concrete is porous, so an unsealed top will soak up red wine, oil, lemon juice, and coffee. That is exactly why we seal it. A good food-safe sealer keeps liquids on the surface where you can wipe them up, and we walk you through reapplying it down the road so the protection holds. On cracking: concrete moves a little as it cures, and you may see fine hairline lines over time. We reinforce the slab and detail it to keep that to a minimum, and honestly, many owners come to like the faint character it gives. What we will not do is pretend it behaves like quartz. Seal it, use a trivet under hot cast iron over time, wipe spills reasonably soon, and a concrete top ages well for years.
Care is simple once you know the rhythm. For everyday cleaning, mild soap and water and a soft cloth is all it takes. Skip the harsh, acidic, or abrasive cleaners, because those are what break down a sealer over time and dull the surface. We finish every top with a sealer suited to how the counter gets used, a heavier-duty one for a hard-working kitchen, and we tell you what to expect from it. Reapplying sealer periodically is the one bit of upkeep a concrete top asks for, and it is a quick job you can do yourself or have us handle. For outdoor bar tops, we seal with the freeze, the dry air, and the strong high-altitude sun in mind, since all three work on an exposed surface harder than they do indoors.
Every Morrison job starts with a free, written estimate and a structural engineer on staff for the work that needs one. Licensed, bonded, and insured, with finishes from a clean broom texture to stamped, colored, and sealed.
You always know what is happening and what it costs before we mix a single yard. Here is the path from first call to final walkthrough.
We visit the site, measure, check drainage and soil, and hand you a clear written quote. No charge, no pressure.
We set the grade, thickness, reinforcement, and finish. Structural work gets engineered and permitted.
Forms, rebar, and a clean pour. We screed, float, and finish to the texture you picked, then cut control joints.
You can walk it in 24 to 48 hours. We walk the job with you and explain how to care for it through the first winter.
Still unsure about something?
Call the crew at (303) 569-4046 and we will talk it through.
Get a free, no-obligation estimate from a crew that knows Colorado soil, Colorado weather, and how to finish concrete that lasts.
Accessibility
Adjust the site to fit how you read and browse. Your choices are saved on this device.